How to Flash a Motorola E398

August 16, 2007

The first thing to do would be to download a program called Motorola PST (Phone Service Tool). We cannot give you a direct link, but remember; Google is your friend! After you have found and downloaded Motorola PST, install it. Also, download the Monster Pack (the file used to change the phone software) and put the file somewhere you can remember.

1.Check your Bootloader version by holding down # and * when you power the phone on. You must ensure that under Boot Loader you have 07.D0. If you have something else, DO NOT PROCEED!

AT THIS POINT ENSURE YOUR BATTERY IS FULLY CHARGED, OR YOU MAY BE STUCK IN BOOTLOADER MODE WITH NO WAY TO RECHARGE THE BATTERY!

3. Make sure your phone is in Data/Fax mode under USB settings

4. Find the directory where Motorola PST is installed and run ‘MultiFlashFlex.exe’

5. Under ‘Preferences’ check the first two boxes

6. Under ‘Enable Flash’ check the box and select the .shx file of the Monster Pack that you will flash

7. Make sure that under ‘Enable Flex’ nothing is selected

8. Start your phone in Bootloader mode, this is done by holding down the star * and hash # keys while powering on

9. Plug your phone in and wait for it to appear in the list (it may appear as S FLASH NEPTUNE LTE)

10. Press start!

Note: This guide is for already changed for 373 version phones! All 372 (stock firmware phones) need to the flash 42_for_all Monster Pack first and THEN the Monster Pack that they want on their phone.

Motorola E398

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: